Tooling System Resin
| Resin | Hardener | Colour | Mixing Ratio (Weight) | Pot Life Min 25°C | Max Thickness mm | Tg °C |
Characteristics
|
|---|---|---|---|---|---|---|---|
| Gelcoats | |||||||
| MG 603 | W 555 W 556 |
White or Light Green |
100:10 100:10 |
14-20 24-30 |
2 2 |
105 108 |
Sandable and polishable, thixotropic, easy demoulding on humid surface also. Negatives and ceramic case moulds.
|
| MG 543 | W 555 W 556 W 557 |
Light Green | 100:9 100:9 100:7,5 |
12-18 18-28 30-40 |
1,5-2 1,5-2 1-1,5 |
100 102 116 |
Hard, chemical and abrasion resistant but polishable. Ceramic case moulds.
|
| MG 544 | W 555 W 556 W 557 |
Blue | 100:9 100:9 100:7 |
12-18 18-28 30-40 |
1-2 1-2 1-1,5 |
110 112 112 |
Hard, abrasion and chemical resistant; W555 for foundry patterns; W556 and W557 for large models and PU moulds.
|
| MG 516 | W 556 W 557 |
Red | 100:11 100:9 |
15-25 20-30 |
0,5-1 0,5-1 |
120 120 |
Medium sandability and chemical resistant. W557 for homogeneous colour surfaces.
PU integral skin and RTM moulds. |
| MC 1163 | W 500 W 556 |
Grey Aluminium | 100:9 100:9 |
30-40 20-30 |
1-1,5 0,5-1 |
110 108 |
Aluminium filler, polishable, chemical and thermoresistant.
Vacuum thermoforming tools and thermal resistant moulds. |
| PC 800 | G 30 | Black | 100:20 | 12-15 | 0,5-1 | ≤-30 |
Thixotropic elastomer PU for flexible coats. Moulds and items with resilient surface.
|
| Epoxy Castings Resins | |||||||
| MC 151F | W 500 W 243 W 101 W 57.01 |
Black | 100:5 100:12 100:12 100:6,5 |
20-30 60-80 30-40 40-60 |
0,5-1 30 20 25 |
84 75 75 125 |
Iron filled. Machinable. W500 for gelcoat. W101 or W243 for patterns and metal forming tools. W57.01 for thermoresistant tools.
|
| MC 152 | W 243 W 101 |
Beige | 100:12 100:12 |
110-130 40-50 |
40 25 |
60 60 |
Mineral filled. Machinable. For room temperature pattern and tools.
|
| MC 153NF | W 243 W 101 K 32 W 57.01 |
Blue | 100:12 100:12 100:5 100:6,5 |
60-90 30-40 25-35 60-90 |
40 25 10 25 |
65 70 80 122 |
Filled, abrasion resistant. Not machinable. Low thermal expansion coefficient. W243 - W101 for room temperature patterns and tools. K32 and W57.01 for thermoresistant tools
|
| MC 1163 | K 21 W 57.01 W 340 |
Grey Aluminium | 100:6 100:10 100:11 |
30-40 40-60 80-100 |
10 10-15 (40) 25 (40) |
110 130 135 |
Aluminium filled. Polishable. Can be filled with small aluminium grains for high thermal conductive solid casting. Thermoresistant tools.
|
| MC 1164 | W 500 W 557 W 243 W 101 W 132 W 340 W 341 |
Grey Aluminium | 100:7 100:5 100:15 100:15 100:11 100:9 100:9 |
30-40 30-40 60-80 25-35 60-80 80-100 25-35 |
1-2 1-1,5 40 25 100 30-40 15-25 |
110 110 65 70 90 135 133 |
Aluminium filled. Polishable. High thermal conductivity. W500 and W 557 for gelcoat and coupling coat. W243-W101 for R.T. tools. W 132-W340-W341 for H.T. tools.
|
| MR 106 | W 206 | Yellow | 100:15,5 | 100-120 | 30(50) | 75 |
Abrasive-filled. Can be furtherly filled with quartz grains. Low cost mass casting system. PU moulds and tools.
|
| MR 108 | W 206 W 101 |
Grey | 100:18 100:16 |
100-120 30-40 |
30 25 |
68 64 |
Mineral filled. Can be furtherly filled with mineral or aluminium grains. Mass casting system for PU and PU shoes moulds.
|
| EC 141NF | W 241 W 242 W 243 |
Transparent Uncoloured |
100:45 100:45 100:400 |
90-110 35-45 60-90 |
20-50 5-10 10-25 |
65 58 70 |
Low viscosity system. Glass imitation epoxy for transparent piece and finish. W 241 for mass casting. W 242 for coating. W 243 for medium thickness.
|
| RIGID POLYURETHANE CASTUNG RESINS | |||||||
| PC 17 | G 127 | Beige | 100:100 | 2-2,5 | 5 | 102 |
Rigid resilient unfilled fast casting PU for scale models reproduction
|
| PC 18 | G 127+Alolt 1 | Beige | 100:100 (300) | 4-6 | 5 (70) | 83 |
Like PC 17 but longer pot-life and with separate filler for negatives and patters models.
|
| PC 21 | G 4 G 4 +EF 31 Fillite |
Beige | 100:25 (plastic) 100:50 (rigid) (100-150) |
2-3 | 5 (50) | 43 107 |
Rigid or plastic unfilled fast casting PU (mixing ratio 25-50 parts G4) without filler for finishing shoe models ore with filler EF 31 Fillite for like wood items.
|
| PC 25 | G 226+Alolt 1 | Beige | 100:100:(300) | 2,5-3,5 | 5 (70) | 104 |
Rigid, unfilled fast casting PU with separate filler for negatives , models, or unfilled for scale models.
|
| PC 26 | G 226+Alolt 1 | Beige | 100:100:(300) | 3-4 | 5 (70) | 104 |
Like PC 25 but longer pot life.
|
| PC 27 | G 127+Alolt 1 | Beige | 100:100:(300) | 4-4,5 | 5(100) | 90 |
Rigid, resilient unfilled PU with separate filler for models. Unfilled for prototypes and scale models.
|
| PC 30 | G 37 | Black/Blue | 100:20 | 3,5-4,5 | 30-50 | 86 |
Rigid, low viscosity filled PU.
|
| PC 32 | G 37 | White | 100:20 | 4-5 | 30-50 | 82 |
Rigid, fluid filled PU. Sandable, polishable
|
| PC 37 | G 37 G 9 |
Red | 100:20 100:20 |
7-9 30-45 |
20-30 50-60 |
58 55 |
Rigid, low viscosity filled PU, machinable, medium and slow cure. Foundry patterns.
|
| PC 38 | G 138+Alolt 1 | White | 100:80:(400) | 12-18 | 15 (500) | 75 |
Rigid resilient unfilled PU with separate filler for mass casting of large press moulds and patterns or unfilled for face casting.
|
| PC 39 | G 226+Alolt 1 | Beige | 100:100:(300) | 10-15 | 10(70) | 80 |
Rigid, unfilled PU with separate filler Alolt 1 or aluminium filler or hollow microspheres for medium-large CNC master or style models or replicas.
|
| PC 1121 | G 121 | White | 100:110 | 3,5-4,5 | 3-5 | 93 |
Rigid, resilient unfilled PU for rapid prototyping vacuum or normal conditions casting. ABS/thermoplastic imitation prototypes.
|
| PC 630 | G 4 | Beige | 100:100 | 20-30 sec. | 20-30 | 75 |
Rigid PU foam, foaming up to 5-10 times in closed/open mould. Very short pot life . For ceramic sanitaryware jacket .
|
| PC 660 | G 4 | Beige | 100:100 | 75-105 sec. | 20-30 | 75 |
Rigid PU foam, foaming up to 4-7 times in closed/open mould. Very short pot life. For ceramic sanitaryware jacket.
|
| Flexible Polyurethane Casting Resins | |||||||
| PC 6-NF | G 130 G 30 |
Blue Beige |
100:15 100:7,5 |
20-30 20-25 |
40-50 40-50 |
- |
Elastomeric filled PU. G130,ShoreA55. G 30 Shore A 65-70. Ceramic case moulds .
|
| PC 140 | G 140 | Yellow | 100:100 | 18-25 | 50 | - |
Elastomeric unfilled PU, Shore A 40. Flexible moulds and tools for plaster and cement elements.
|
| PU 412 | G 31 | Beige | 100:30 | 30-40 | 20-30 | - |
Flexible filled PU Shore A75, low tear resistance but high dimensionals stability in the time. Ceramic case moulds.
|
| PC 1055 | G 121 | Amber | 100:20 | 5-8 | 5-10 | - |
Elastomeric PU Shore A 55 for flexible pieces and prototypes. Can be mixed with PC 1088 to change hardness.
|
| PC 1088 | G 30 | Amber | 100:33 | 5-7 | 5-20 | - |
Elastomeric PU Shore A 90 for flexible pieces, prototypes, tools.
|
| PU 585 | G 185 | White | 100:50 | 35-45 sec. | 300 | - |
Elastomeric PU, foaming up to 9-18 times in closed/open mould. Very short pot-life.
|